Indirect water heaters are given its name very literally – they don’t directly warm up the water just like regular water heaters, thus they don’t have any controls, however they’re also more than simply storage tanks. Just like a regular water heater, an indirect water heater features its own cold-water inlet and it is full of fresh potable water coming from the city water system. However the indirect heater is completely operated by the boiler and attached to it via a closed-loop water pipeline running in between them. The pipe runs through the boiler to the indirect tank, in which it attaches using a heat exchanger coil that’s essentially a metal pipe twisted all around just like a corkscrew within the tank, flanked by the household water to be warmed up. The opposite end of the coil links to one more pipe which runs back into the boiler, making a closed loop.

Essentially, the indirect water heating system makes use of the energy produced by the furnace or boiler to warm up the water and air in your house. With the furnace or boiler perform dual work throughout the winter season, you’re basically having your water heated at no cost, as your heating system would be functioning anyway.

Considering the fact that water heating can be the reason for between 20 % to one third of your power bills during the cold months, that’s quite a big problem- one which gets an even better deal whenever you pair the indirect water heating system along with a high efficiency boiler or furnace being the heat source.

Given that setting up the indirect hot water maker entails both the heating and electrical systems. Employing a professional is the best way to go if you wish to make sure that your system will run efficiently enough to recover the expense of (it would- usually in just a couple of years, if it’s done properly ).

We’ve featured 4 benefits you’ll see by changing your traditional water heater to an indirect hot water heater:

SolarHotWaterSystem

High Efficiency: Since these systems utilize a home’s boiler being a heat source, they’re generally the most efficient option for hot water heaters. In addition, the heated water is held in tanks that enables the furnace to cycle less often, eventually saving money and energy.

High Productivity: Simply because indirect hot water heaters could keep in between 30 and 200 gallons of water, they make 2 to 3 times the quantity of hot water as the regular heater. Given that they operate in conjunction with your home heating system, they also supply hot water virtually instantly.

Saves Cash: Using a heat exchanger in order to heat water through the space heating unit, indirect hot water heaters function simultaneously as you select to heat the air indoors. This could benefit your energy bill all year round however, particularly over the summer season.

Reliability: Indirect hot water heaters are very easy and due to that, they are likely not to only have a lengthy life time, but they’re easy to maintain. There aren’t any electric components to burn out, no direct flame to keep up, and the majority of units are built from durable stainless steel.

A few other benefits of indirect water heaters are listed below:
  • The most significant benefits of the gas-fired indirect water heaters are the considerable decrease of flue losses.
  • Such units are more efficient, having less standby heat loss, in comparison with the regular tank type.
  • Much less maintenance – no extra burners to maintain.
  • Less cost – no extra venting needed or fuel lines to function.
  • Far better performance – more available hot water having faster recoveries.
  • Easy to size and can easily be installed.